Whirlpool GC900QPPB - Manual (Page 9)

9
Trimless Panel without Handle
Dimensions
Use these dimension drawings to create a custom panel for use
without a trim kit. The panel should be
¹⁄₂" (13 mm) min. thick.
Installation
1. Remove the mounting screws attaching the foot pedal to the
compactor. Remove foot pedal.
2. Remove mounting screws attaching the toe guard to the
compactor. Remove toe guard.
3. Remove the mounting screws attaching the decorative panel
to the compactor. Remove decorative panel and discard
mounting screws.
4. Align the bottom of the custom panel with the bottom of the
drawer front.
5. Secure the panel from the back using 4 – #8 x 1" wood
screws as shown.
6. Attach a 15" x ¹⁄₂" quarter-round filler along the top of the
drawer front using glue or screws.
7. Reinstall the toe guard using the existing screws and
¹⁄₂"
washer. Then, reinstall the foot pedal.
A. Mounting screws
B. Foot pedal
15"
(38.1 cm)
25"
(63.5 cm)
A
A
B
A. Custom panel
B. 15" x
¹⁄₂
" quarter-round
C. Panel screw locations
D. Toe guard
E. Washer
G. Toe guard screw
A
B
D
E
F
C
C