Brother PC-420 - Manual (Page 146)

APPENDIX —————————————————————————————————————————————————————
140
GETTING READ
Y
CONTENTS
SEWING BASICS
U
T
IL
IT
Y
S
T
ITCHES
APPENDIX
INDEX
The fabric does
not feed.
The feed dogs are lowered. Slide the drop feed lever to the left. page 97
The stitch is too fine. Lengthen the stitch length. page 56
The presser foot that is used is not
appropriate for the type of stitch that
you wish to sew.
Attach the presser foot that is appro-
priate for the type of stitch that you
wish to sew.
page 128
The pressure of the presser foot is
weak.
Turn the presser foot pressure dial to
the right to increase the pressure of
the presser foot.
page 39
The thread is tangled, for example,
in the shuttle.
Remove the tangle thread. If the
thread is tangled in the shuttle, clean
the shuttle.
page 135
The sewing lamp
does not come on. The sewing lamp is damaged.
Contact your retailer or the nearest
authorized service center.
–
Nothing appears
in the LCD.
The brightness of the LCD is either
too light or too dark.
Adjust the brightness of the LCD. page 142
Symptom Probable Cause Remedy Reference