Britax FRONTIER 85 SICT User Manual

Page 16

Advertising

1 Rotate the positioning block

to the front and place the child

seat on the vehicle seat.

* Ensure harness height is adjusted

to fit your child.

2 Position the shoulder part of

the vehicle belt behind the

head restraint.

IMPORTANT: DO NOT route the vehicle

belt under the cover or through the belt

guide on the head restraint.

3 Route the lap and shoulder

parts of the vehicle belt over

the lap belt guide, through the

belt slot, across the back of the

child seat shell, then through

the second belt slot.

4 Verify the vehicle belt is not

twisted, then buckle.

5 Push the child seat firmly into

the vehicle seat while removing

all slack from the lap part (a),

then from the shoulder part (b)

of the vehicle belt.

* Ensure that the vehicle belt is

locked as directed by your vehicle

owners manual.

* The child seat is secure when it

cannot be moved front-to-back

or side-to-side more than 1 in.

(2.5 cm) at the belt path. If the

child seat is not secure, repeat

the installation procedure or use a
different seating location.

6 Firmly press the Versa-Tether® hook to the vehicle tether

anchor to attach. Remove all slack from the tether webbing.

7 Use the elastic strap to contain extra webbing.

Checklist

Check that positioning block is rotated to the front.

Check all connections and verify that child seat is secure.

* The child seat is secure when it cannot be moved front-to-

back or side-to-side more than 1 in. (2.5 cm) at the belt path.

If the child seat is not secure, repeat the installation procedure

or use a different seating location.

Ensure any excess Versa-Tether

webbing is stored in elastic

band. Always ensure any excess webbing is contained within

your vehicle.

Lap Belt – Short Path

Before you begin:

Check that your vehicle has a seat belt that can be locked.

* Check your vehicle owner’s manual to determine what type

of vehicle belt you have and how it can be locked for use with

child seats.

Check that your vehicle has a top tether anchor?

* Britax recommends that the Versa-Tether is used at all times.

Using the tether will improve the stability of the child seat and

reduce the risk of injury. Check your vehicle owner’s manual for

tether anchor locations.

Remove the Versa-Tether

hook from the storage clip and

place it over the child seat back to keep it from becoming

pinned between the child seat and vehicle seat during

installation.

Install with the lap belt using only the short belt path as shown

above.

Versa-Tether

(Top Tether)

Installing the Child Seat: Harness Mode

Advertising