Bushnell CF 500 - Manual (Page 2)

3 2
GENERAL INSTRUCTIONS
The CF 500 reticle gives hunters a series of aiming points that correspond to various centerfire loads. These
aiming points allow hunters to expand their effective range.
Bushnell would like to stress that these
tools are only as good as the time spent practicing with them. Nothing can replace quality firing
range time and becoming comfortable shooting at each of the prescribed yardages, while noting bullet
placement. It is imperative for the hunter to spend time at the range, gaining familiarity with the reticle
and how it works with their firearm and bullet load. Ballistic performance can vary depending upon a
number of factors, including barrel length, powder type, bullet type, and numerous weather/atmosphere
related variables.
ENGLISH
THE CF 500 RETICLE – For Centerfire Rifles
Designed to be used with today’s most popular centerfire rifle cartridges, the CF 500 reticle is intended to
be sighted in at 100 yards, and provides aiming points at every 100 yd increment, out to 500 yds. The user
can sight-in at 100 yds on any magnification setting, but for the ballistic reticle feature to function properly,
the scope’s magnification must be set to the correct power. The correct settings for the scopes that include
the CF 500 reticle are as follows:
If your scope is a: Use this power
setting:
3-9x 40 9x
4-16x 40 16x