Liebherr HS 835 HD Litronic - Manual (Page 24)

24
Hydraulic
Spherical Grab
HLKG/HLKG“CD”
Pile diameter Type L L1 L2 B B1 B2 S Weight Capacity
mm kg l
1200
cased
HLKG1-118
5760
6640 6715
870
1020 960 1080 8650 165
1200
uncased
HLKG1-1200
“CD”
6690 6800 1160 1170 1200 10550 230
1300
cased
HLKG1-130
5760
6690 6800
990
1010 1060 1180 8850 23
1300
uncased
HLKG1-1300
“CD”
6740 6900 1260 1270 1300 10850 400
1500
cased
HLKG1-150
5760
6800 7045
990
1350 1260 1380 9420 420
1500
uncased
HLKG1-1500
“CD”
6850 7135 1460 1470 1500 12115 680
1800
cased
HLKG1-180
5760
6975 6975
990
1650 1560 1670 11050 810
1800
uncased
HLKG1-1800
“CD”
7030 7345 1720 1750 1800 13850 1030
2000
cased
HLKG1-200
5760
7030 7470
990
1800 1700 1800 11290 1030
2000
uncased
HLKG1-2000
“CD”
7115 7625 1900 1950 2000 14290 1500
Technical Data
L1 L2 L
B1 S
General Remarks
The Hydraulic Spherical Grab type HLKG is used on
jobs, where drilling has to be carried out free of vi-
brations and/or where partially cased or uncased
drilled shafts are to be produced.
The high deadweight in conjunction with the high
closing force ensures a high efficiency. The hydrau-
lic turning device enables the grab to be turned
100° to ensure a calibration of the borehole.
To recognize and correct any deviation of the verti-
cal excavation direction, all hydraulic spherical
grabs are equipped with a two-axis inclination sen-
sor. The inclination sensor values are monitored in-
side the operator’s cabin. For uncased drilled shafts
the grab type HLKG “CD” is used. The jaw dimensi-
ons are adapted to the respective shaft diameter.