Britax BOULEVARD 70 - Manual (Page 26)

24
Using the Versa-Tether ®
Tether anchor locations vary from vehicle to vehicle. Check your
vehicle owner’s manual and look for the tether anchor symbol
shown in the diagram to help identify
where the top tether anchor points
are located in your vehicle. Britax
recommends that the tether be used at
all times when installing the child seat.
Using the tether will improve the stability
of your child seat and reduce the risk of
injury. See the diagrams on page 25 for
possible rear- and forward-facing Versa-
Tether installation configurations.
WARNING: Failure to follow the guidelines below may
cause the child seat not to perform as intended:
• Attach the Versa-Tether only to tether anchors identified by
your vehicle manufacturer as tether anchorage points. Only
use the designated tether anchor for each seating position.
• If your vehicle does not currently have a tether anchor
attachment, refer to your vehicle owner’s manual or contact
your vehicle man u fac tur er for assistance. DO NOT modify
your vehicle without advice from your vehicle manufacturer.
• Store the Versa-Tether in the pouch on the back of the child
seat when not in use. DO NOT install the child seat with the
Versa-Tether attached to the carry clip.
Child Seat Functions