A digital surround receiver, Connect a digital surround receiver, Record with your recorder – Philips 50PF9431D-37B User Manual
Page 47: Select connected equipment, English, User man ual, Record a tv program
DIGITAL AUDIO OUT
o
DISPLAY
SYNCHRONIZED
o
o
AUDIO
OUT
L
R
DISPLAY SYNCHRONIZED
Connect a Digital Surround receiver
45
English
User Man
ual
<
Connect a MultiChannel Surround receiver to the
DIGITAL
AUDIO OUT
connector at the bottom of the TV.
Record a TV program
You can record a TV program using your recorders tuner
without affecting your TV.
1. Select the channel number on your recorder.
2. Set your recorder to record.
See the handbook for your recorder.
Note:When recording analog programs, switching channel
numbers on your TV does not disturb recording !
Record with your recorder
Note: Due to legal requirements, it is possible that with
certain copy protected PCM audio qualities from a
peripheral equipment connected to the
HDMI
input, the
Digital audio output signal is muted.
DIGITAL
AUDIO
OUT
Select connected equipment
Before operating your connected equipment you have to make
a selection in the Setup, Select your source menu, p. 22.
1. Press the
AV+
button repeatedly or select Source in the
Setup menu (see p. 22) to select
AV1
,
AV2
,
AV3
,
HDMI 1
,
HDMI 2
, Side or TV, according to where you connected
your devices.
2. Press the cursor up/down.
3. Press
OK
.
.@
7
8
9
0
AV+
-
✓
- FAVORITES -
FORMAT
RECORD
VIEW
A/CH
INFO