Philips VRA671AT - Manual (Page 49)

VAR.SLOW
VCR TV CBL/DBS
VOL.
CH.
MUTE ALT.CH
3
6
9
0
2
5
8
1
4
7
TRACKING F.ADV
VCR/TV
REC/OTR
POWER
SPEED
STATUS/EXIT
STOP
PLAY
F.FWD REW
MEMORY
X2 PLAY
SLOW
VCR PLUS+
/ENTER
QUICK TIME INDEX
SEARCH
REC END SKIP
EJECT
MENU CLEAR
PAUSE/STILL
Remote Locator 49
PRESS MUTE THEN
PAUSE KEY
TO CHANGE CODE FROM 4
TO END PUSH EXIT
YOUR REMOTE LOCATOR
CODE IS 4
PRESS ANY DIGIT
TO CHANGE CODE
TO END PUSH EXIT
YOUR REMOTE LOCATOR
CODE HAS BEEN CHANGED
NEW CODE IS 3
TO END PUSH EXIT
Letting your VCR find your remote for you...
1
Press the POWER button on the VCR to turn on the VCR.
Your remote control beeps and LOCATING REMOTE appears on
the screen. The remote control will beep for about 30 seconds. (The
exception is when you plug the VCR power cord into the wall outlet
for the first time.) Or, press any button on the remote control to
stop the beeping.
If another remote control beeps...
The VCR may find other remote controls. If this occurs, follow the
steps below to program the VCR to find only its remote control.
1
Press the VCR button, then press the MENU button.
2
Press the PLAY/o button or the STOP/p button to select
REMOTE LOCATOR, then press the F.FWD/B button.
3
Press the MUTE button, then press the PAUSE/STILL
button.
4
Press one Number button (0 - 9) to enter a new single-digit
code for your remote control. Your remote control will beep
briefly.
5
Press the STATUS/EXIT button.
If another remote control beeps...
5
2
1
4
3
3
• If there are no batteries in the
remote control, it will not beep.
Helpful Hint
This device complies with part 15
of the FCC Rules. Operation is
subject to the following two con-
ditions: (1) This device may not
cause harmful interference, and (2)
this device must accept any inter-
ference received, including inter-
ference that may cause undesired
operation.