Fluid Management 1500HS Accutinter - Manual (Page 18)

Fluid Management Customer Service 1 . 800 . 462 . 2466

16 | Accutinter 1500
After the barcode scanner is connected to the computer and keyboard, it must be enabled in ColorPro.
Follow these steps to enable the barcode scanner:
Getting Started
Connecting the barcode scanner (optional)
8
After enabling the barcode scanner, you can
test the scanner by dispensing.
a. Open the Dispense menu.
b. Select a formula.
c. Click the Dispense button. If you receive
a prompt that says, “Please Scan the Base
Barcode”, you have successfully enabled
the bar code scanner.
7
a. Check Print Override Base to allow
operators to manually override using
scanner.
b. Check Barcode Chip Scanning Enabled
if you are using barcodes to identify
formulas from other color chips.
a. Check the Barcode Scanning Enabled box
on the Barcoding and Extra Options tab.
b. Click Apply Changes, then click Yes and
OK.
c. Close.
6 5
Locate FM_Customizer from Fluid
Management folder and launch.
a. Type in “service” when you are prompted
for the password.
b. Click Check.