transmission oil and filter, Approved universal tractor fluids, John deere – SkyTrak 8042 Operation Manual User Manual
Page 135: Ford / new holland, Massey ferguson, Chevron, Jdm j20c (hy-gard), Esn-m2c134-d (hydraulic oil134), M-1141 (permatran iii), Chevron 1000 thf
Advertising
![background image](/manuals/546108/135/background.png)
General Maintenance
133
Model 8042
Rev. 11/03
A. Transmission Oil Level Check
1. Level the vehicle, ground the carriage, place travel select lever in
(N) NEUTRAL, move neutral lock lever to NEUTRAL LOCK position
and engage the parking brake switch.
2. Check oil level with engine running at idle and oil at normal
operating temperature.
3. Remove transmission dipstick (6) through access hole (7) in trans-
mission covers (8) and check reading.
4. Add Universal Tractor Fluid to transmission as required to bring up
to full mark.
8. Transmission Oil and Filter
APPROVED UNIVERSAL TRACTOR FLUIDS
JOHN DEERE
FORD / NEW HOLLAND
MASSEY FERGUSON
CHEVRON
JDM J20C (HY-GARD)
ESN-M2C134-D (HYDRAULIC OIL134)
M-1141 (PERMATRAN III)
CHEVRON 1000 THF
10
OH2660
OS08900
OH23622
6
8
7
Advertising