GrimmSpeed 02-07 WRX Radiator Shroud - Manual

GrimmSpeed Install Guide Series
Installing the GrimmSpeed 02-07 and 08+ Radiator Shroud
Updated 1/21/13
Introduction: This guide will illustrate the installation of the GrimmSpeed Radiator
Shroud with integrated tool tray. The difficulty here is relatively low, so take your
time and enjoy the job! Note that installation for the 08+ shroud is very similar to
the 02-07, minus the hood prop.
Tools: The tools listed below are suggested for this task (figure 1). Optional tools
are noted.
- Pliers
- 10mm socket (removal of air scoop if equipped)
- 12mm socket (extension recommended)
- Ratchet
Figure 1: Tools
Tips: Using an extension will help give you more space to spin the ratchet and avoid
damaging your radiator shroud.
Pliers
10mm, 12mm socket
Ratchet