Mueller Snap Lock (MSL) - Manual (Page 40)

40
FIXED END WALL / PARAPET DETAILS
|
WOOD DECK
Wood Deck
End Dam
Tape Sealant
Tape
Sealant
End Wall Trim
Butyl
Caulk
1 1/2"
Woodgrip Screw
Counter Flashing by Others
Mueller Snap
Lock Panel
Underlayment
Installation Steps: (use only with floating eave)
1. To accommodate the placement of the End Wall trim and end dam, apply the butyl tape sealant across the
pan of the panel.
2. Install the end dam using woodgrip screws on 4” centers through the panel and end dam as shown.
3. Use butyl caulk to seal the ends of the end dam.
4. Apply butyl tape sealant to the top of the end dam.
5. Fasten End Wall trim to end dam using #14 x 7/8 Lap screws on 6” centers.