Brother QL-650TD - Manual (Page 8)

Printing a Label 8
Introduc
tion
Crea
ting La
be
ls (F
or
Wind
ows)
C
re
at
ing
L
a
be
ls (
F
or
M
ac
int
os
h)
Ap
pe
nd
ix
Printing a Label
This section explains the procedure for printing a label you have created.
1
In the Print property box, set the number of copies to
be printed to [1] and click
.
The label is printed.
2
Cut off the printed label using the Cut
button (Brother QL-550/650TD) or the Cut
lever (Brother QL-500) of the printer.
Print Options and label cutting
When you click in the Print property box, the [Print]
dialog box appears.
This dialog box allows you to set the print options and
the number of copies.
If the Print property box is not shown in the Property
dock, click
to display the box.
In the [Print] dialog box, if [Auto Cut] is
checked in [Options], the printed labels will
be automatically cut. (Brother QL-550/
650TD only)
Setting Description
Options
Auto Cut
(Brother QL-550/
650TD only) When this check box is checked, each label will be automatically cut.
When this check box is not checked, labels won't be automatically cut after
printing. Press the Cut button in the printer to cut.
Mirror Printing
When this check box is checked, labels will be printed so they can be seen
when looking through a window.
Output directly
to Printer Driver
For normal use, this check box should be checked.
Copies Number Used to specify the number of copies to be printed.
By clicking in the [Print] dialog box, you can select more detailed settings. For example, you can
specify that priority be given to printing quality or printing speed when printing labels.
When you print labels that require higher quality, such as barcode labels, select [Give priority to print
quality].