Class1 ITL Mini Remote Driver one-page_manual 112648 - Manual

Intelli-Tank Mini Remote Driver
Quick Manual
UNIT SPECIFICATIONS
1. Unit P.N. 112082.
2. System Voltage 9-32 volts.
3. Outputs rated for .5 amps (Short
Protected)
INSTALLATION
WIRING
Mating Connector: AMP 794821-1
Seal: AMP 794772-8
Wire Seal: AMP 794758-1
Terminals: AMP 770988-1
(Optional Wiring Pigtail # 112646)
Pin
Description
1.
Ground
2. Output 1
3. Output 2
4. Output 3
5. Data Input
6. Data Reference
7. Output 4
8. Power
1 Page Manual P.N. 112648 2-23-2005
UNIT OPERATION
The unit is a slave for the Class1 ITL 4 or 5 light
tank level gauge. It will drive 4 external lights up
to .5 amps a piece or for higher current lights a
relay must be used.
During power up the unit will cycle on each
output starting with output 1. The unit will then
show current tank level information.
Wiring Diagram Example.