Apple Color StyleWriter 2200 - Manual (Page 12)

This chapter introduces the Apple Color StyleWriter 2200 printer and
explains how to set it up. After you follow the instructions in this chapter,
you’ll be ready to print.
Before you begin Make sure that your Macintosh computer is already set up
and that you know the basics of its operation. Then, before you start
unpacking the printer, take a moment to review the following information on
safety issues and special setup situations.
Special setups
This chapter explains how to set up the Color StyleWriter 2200 no matter
what your situation is. Here are two special situations you might want to take
note of:
m
You plan to share the Color StyleWriter 2200 with others on your network. Even if
you plan to share the printer with others on your AppleTalk network, you
must first set it up as described in Chapter 1. (That is, you must connect it
directly to your computer rather than connecting it to the network.) When
you’re finished with this chapter, see “Sharing Your Printer With Other
Users” and “Printing on a Shared Color StyleWriter 2200,” both of which
are in Chapter 2.
m
You use QuickDraw GX. If you use QuickDraw GX, follow the setup
instructions in this chapter, then see Appendix D for instructions on using
the Color StyleWriter 2200 QuickDraw GX software.
1
1
Setting Up Your Printer