Apple Xserve (Early 2008) DIY Procedure for Light Pipe Assembly - Manual (Page 5)

Xserve (Early 2008) Light Pipe Assembly Replacement Instructions 5
Leave the power button and system identifier button on the server enclosure, but note that 3.
the button(s) could be loose. To prevent damage to the buttons, be sure to align the buttons
with the front panel openings as you install a replacement front bezel.
Place the front bezel on the server, carefully matching openings with buttons and ports. With 4.
buttons and ports aligned, press the front panel fully into place so the buttons are flush with
the bezel.
Secure the front bezel the two bezel brackets, four 4-mm long screws, and the 8-mm long 5.
center screw with star washer.