Apple Xserve (Early 2008) DIY Procedure for Enclosure User Manual

Page 57

Advertising
background image

Xserve (Early 2008) Locking Mechanism Rod and Gear Replacement Instructions

3

Removing the Installed Locking Mechanism Rod and Gear

Locate the locking mechanism rod and gear.

1.

Gently press back on the latch, tilt up the gear end of the rod, and remove the rod from the

2.

server.

If you are replacing the plastic gear on the end of the rod, slide the gear off the rod.

3.

Advertising
See also other documents in the category Apple Software: