Lull 1044C-54 Series II Service Manual - Manual (Page 201)

Boom and Transfer
31200079 6-59
Fig. 6-63: Upper Rear Slide Pad Removal – Middle (Forward) Boom Section
16. (Ref. Fig. 6-63) Remove upper rear slide pads from middle (front)
boom section as follows:
a. Remove two (2) each capscrews (Item 6), lockwashers (Item 4),
flatwashers (Item 5), and pad retainers (Item 3) securing upper
slide pads to rear of middle (forward) boom section.
b. Remove four (4) capscrews (Item 8) and lockwashers (Item 7)
securing slide pads (Item 2) to top rear of middle (forward) boom
section. Remove slide pads and shims (Item 1).
Fig. 6-64: Upper Rear Slide Pad Removal – Inner Boom Section
J
124
5
1
2
4
3
5
6
7
8
# Description
1 Shim
2 Rear Upper Slide Pad
3 Pad Retainer
4 Lockwasher
# Description
5 Flatwasher
6 Capscrew
7 Lockwasher
8 Button-Head Socket Capscrew
J
126
9
8
1
2
3
4
5
6
7
# Description
1 Inner Boom Section
2 Upper Slide Pad
3 Pad Retainer
4 Flatwasher
# Description
5 Lockwasher
6 Capscrew
7 Lockwasher
8 Button-Head Socket Capscrew