Spyclops SPY-DVR16 User Manual - Manual (Page 9)

9
• Frame rate: The frame rate is how many unique consecutive images are displayed per second in the video
to give the illusion of movement. Keep in mind, that the minimum limit that our brain needs to perceive
moving frames as a video is 24 Frames per Second, so there is no big difference between 24 and 30 fps
except the higher frame rate will effect your bandwidth and data storage
3.4 Record Setup:
Use your mouse and click the right button to select “Setup” key, select “System setup”, and select “Record Setup”
• Channel: Pick the camera view you want to record
• Weekday: Choose the day you would like to set up, or you can choose “Everyday” if you want everyday
to be recorded at the same times/settings.
• Modes: “ Manual ” is when you have manually specified the recording, and it is in blue. “ Time ” will give a
constant recording according to what time you have selected, and is shown in red on the time bar,
“ Motion ” will only record when motion is detected and is shown in green on the time bar and “ Sensor ”
Sensor option is not available in current models. The time bar will display which recording option is
running for the full 24 hour day
*Note: “ Motion ” is recommended in order to save disk space
• Copy to: Select the target channel on the right. Then select “Copy to” and “OK”. The system will set the
current channel setup information to other channels selected or “all”