Synergy 5000 - Jeep TJ Front Coilover Bracket Kit - Manual

SYNERGY MFG. 870 INDUSTRIAL WAY, SAN LUIS OBISPO, CA (805) 242-0397
PPM-5000 SYNERGY SUSPENSION JEEP TJ FRONT
COILOVER BRACKET KIT
Version 1
GENERAL NOTES:
Requirements:
Fabrication and welding skills, grinder with cut off wheel, and a welder. A plasma cutter
(or cutting torch) and other fabrication tools will make the install easier. This kit requires
cutting and welding of the frame.
This kit requires cutting off part of the factory shock mounting bracket and parts of the
inner fender. You will also have to weld the new bracket in place. Some under hood
components may need to be relocated or repositioned. This kit is designed to use a 2.0
Fox or Sway-A-Way 12" Travel shock with a 3" lower bumpstop spacer (not included in
the kit). A 14" travel shock can be used but up travel will be sacrificed.
1. Remove the front tires, wheels, shocks, springs, and any under hook components
that may interfere with installation.