JLG 1200SJP Operator Manual - Manual (Page 59)

SECTION 3 - MACHINE CONTROLS AND INDICATORS
3121141 – JLG Lift – 3-19
NOTE: Refer to Fuel Reserve/Shut-Off System in Section 4 for more
detailed information concerning the Low Fuel Indicator.
8. Fuel Level Indicator
Indicates the level of fuel in the fuel tank.
9. Creep Speed Indicator
When the Function Speed Control is turned to the creep
position, the indicator acts as a reminder that all functions
are set to the slowest speed. The light flashes if the control
system puts the machine into creep speed and will be on
continuously if the operator selects creep speed.
10. System Distress Indicator
The light indicates that the JLG Control System has detected
a malfunction and a Diagnostic Trouble Code has been set in
the system memory. Refer to the Service Manual for instruc-
tions concerning the trouble codes and trouble code
retrieval.
The malfunction indicator light will illuminate for 2-3 sec-
onds when the key is positioned to the on position to act as
a self test.
LOW FUEL
(FLASHES ONCE
PER SECOND)
1/4 TANK
½ TANK 3/4 TANK FULL TANK
EMPTY
(FLASHES TEN
TIMES
PER SECOND)
Figure 3-8. Fuel Level Indicator