JLG 800A_AJ Operator Manual - Manual (Page 53)

SECTION 3 - MACHINE CONTROLS AND INDICATORS
3121209 – JLG Lift – 3-13
ONLY USE THE PLATFORM LEVELING OVERRIDE FUNCTION FOR
SLIGHT LEVELING OF THE PLATFORM. INCORRECT USE COULD CAUSE
THE LOAD/OCCUPANT TO SHIFT OR FALL. FAILURE TO DO SO COULD
RESULT IN DEATH OR SERIOUS INJURY.
9. Platform Leveling Override
A three position switch allow the operator to adjust the
automatic self leveling system. This switch is used to
adjust platform level in situation such as ascending/
descending a grade.
10. Articulating Jib Boom (If Equipped)
The ARTICULATING control switch provides raising and
lowering of the jib when positioned to UP or DOWN.
11. Fuel Select (Dual Fuel Engine Only) (If Equipped)
Gasoline or liquid propane fuel may be selected by mov-
ing the switch to the appropriate position. It is unneces-
sary to purge the fuel system before switching fuels, so
there is no waiting period when switching fuels while the
engine is running.
12. Work Lights (If Equipped)
The switch, on the light, operates work lights if the
machine is so equipped. The power/emergency stop
switch must be on, (mushroom button out) but ignition
switch does not have to be on to operate the lights, so
care must be taken to avoid draining the battery if left
unattended. The master switch and / or the ignition
switch at the ground control will turn off power to all
lights.