JLG 601S ANSI Parts Manual - Manual (Page 78)

2-32 601S 3120747
SECTION 2 TURNTABLE
72 1 Breaker, Circuit Options:
Not Required Machines With ADE System
4360294 Breaker, Circuit - 30 Amp - Model 601S & 601S With a
“Enhanced Hostile Environment Package”
73 1320222 1 J-Clip 3/8”
74 1320223 6 J-Clip 1/2”
75 0641606 3 Bolt 3/8”-16NC x 3/4”
76 3422532 1 Pin, Hitch
77 3790152 1 O-Ring
78 3960407 1 Gasket
79 4791400 4 Starwasher 1/4”
80 0701012 4 Bolt, Metric M10 x 25mm
81 0701015 4 Bolt, Metric M10 x 35mm
82 0642010 1 Bolt 5/8”-11NC x 1 1/4”
83 4752000 1 Flatwasher 5/8”
84 1701505 1 Decal - Diesel (Not Shown - Located on Hood)
85 2720058 11ft/3.4m Hose
86 2220794 1 Fitting, Barbed
87 4711600 3 Flatwasher 3/8” Narrow
88 Not Used
89 3200362 2 Mount, Rubber Engine (Front)
90 4711400 1 Flatwasher 1/4” Narrow
91 4100026 2.5ft/0.8m Sleeve, Nylon
92 4240033 2 Strap, Tie
93 1 Plug 3/8” Options:
Not Required Plug - Model 601S
3520060 Plug - Model 601S With a “Enhanced Hostile Environment
Package”
94 4060805 A/R Flex-Trim 1/4”
95 4060804 7in/17cm Flex-Trim 3/16” (Prior to S/N 67821)
96 1060637 1 Lanyard
97 0641808 2 Bolt 1/2”-13NC x 1”
98 3311801 1 Nut 1/2”-13NC
99 4751800 1 Flatwasher 1/2”
100 1 Plug 1 1/2” Options:
Not Required Model 601S
3520035 Model 601S With a “Enhanced Hostile Environment Package”
101 1 Plug 1” Options:
Not Required Model 601S
3520033 Model 601S With a “Enhanced Hostile Environment Package”
102 A/R Adhesive Options:
Not Required Model 601S
0100010 Model 601S With a “Enhanced Hostile Environment Package”
103 4 Plug 7/16” Options:
Not Required Model 601S
3520054 Model 601S With a “Enhanced Hostile Environment Package”
104 4 Plug 5/16” Options:
Not Required Model 601S
3520034 Model 601S With a “Enhanced Hostile Environment Package”
105 0641826 2 Bolt 1/2”-13NC x 3 1/4”
FIGURE 2-9. DEUTZ ENGINE INSTALLATION - 3CYL (PRIOR TO S/N 78257) (CONTINUED)
ITEM # PART NUMBER QTY. DESCRIPTION REV.