JLG G6-42A Operator Manual - Manual (Page 110)

Section 5 - Attachments
5-34 31200149
Truss Boom
Use Appropriate Truss Boom Capacity Chart
To determine maximum capacity, refer to “Telehandler/
Attachment/Fork Capacity” on page 5-6.
Suspend loads in accordance with requirements set forth in Section
1 - General Safety Practices.
The boom joystick (1) controls lift/lower and extend/retract movement of the boom.
The attachment tilt joystick (2) controls truss boom tilt.
• Move joystick back to tilt up.
• Move joystick forward to tilt down.
Winch Control (if equipped):
The auxiliary hydraulic joystick (3) controls the truss boom mounted winch.
• Move joystick up to lower cable.
• Move joystick down to raise cable.
Installation Procedure:
• Refer to “Attachment Installation” on page 5-13.
OY0570
OY0353
1
2
3