Front, Back remote, Device overview – IOGear GW3DHDKIT User Manual
Page 3
Front
1
2
3
4
1
2
3
1.
Source Indicator - The solid blue LED indicator shows the active media source
2.
Source Selection Button - Press to switch media source of the transmitter
3.
Power Button with LED Indicator - Press to turn the transmitter on or off
4.
IR Sensor - See IR Blaster section for details
Back
Remote
2
1
1
3
4
5
7
8
9
6
1.
Tripod Bracket
2.
DC - Power adapter socket
3.
HDMI 1 - HDMI media source 1
4.
HDMI 2 - HDMI media source 2
5.
HDMI OUT - HDMI loop-through port for local
TV connection (for 2 TV set-up)
1.
Power - Press to turn both receiver and transmitter on or off.
2.
IR - Press to switch the IR Blaster frequency to meet media source
device’s requirement. Please refer to your device’s IR specifications.
3.
INFO - Press to show on-screen-display (OSD) information on your
Receiver TV. Press again to exit.
4.
SOURCE Selection - Press to switch media source of the transmitter
6.
IR OUT - IR blaster cable port (optional)
7.
SERVICE - Reserved for manufacturer service purposes
8.
Mini USB - Power adapter socket
9.
HDMI - HDMI output port for TV connection
POWER
IR
INFO
SOURCE
Device Overview
Transmitter
Receiver
Transmitter
Receiver
3
4
1
2