IOGear GWPAP1 - Manual (Page 14)

14
Internet Connection
Android
Router Mode Setting
Follow the steps below to setup the NetShair Nano for Router
Mode. If you are unsure about which mode to use, see Router
Mode or AP Mode (page 5) to confirm the proper setting.
1. Make sure the “NetShair_Nano_XXXX” Wi-Fi network is
connected. Open the NetShair Nano App.
2. On the Home screen, tap
Advance Setting.
3. Tap Set Operation Mode and then
tap Router and press OK.
4. A notification saying your settings
have been saved will appear, tap
Later to continue without the
NetShair Nano rebooting.
DHCP Setup continue to page 15
DSL Modem Setup continue to page 16