Echo DL10570 Owners Manual v.1 - Manual (Page 16)

Debris Loader Owner’s Manual 12
FEATURES & CONTROLS
3.4 ENGINE CONTROLS
1. Engine choke: Use when starting a cold engine. Move
to ON position when starting. Move to OFF position
when engine is running. Full choke may not be neces-
sary when starting a warm engine. In this case, partial
or no choke may work best.
2. Fuel cut-off switch: Move to the ON position to start
and run engine. Move to OFF position when engine
is stopped.
3. Engine throttle: Changes engine speed. Push lever
all the way to the fast position for full throttle operation.
Push the opposite way for engine idle. Push all the way
to the slow position to shut engine off. Refer to engine
manual for further engine operating instructions.
4. Engine switch: Turn to ON position to start and run
engine. To stop, turn to OFF position.
5. Starter cord: To start, pull the cord until light resistance
is felt and then pull briskly.
Figure 10, 390cc Honda engine controls
Figure 11, 670cc Honda engine controls
Figure 12, 570cc Briggs engine controls
Figure 13, 725cc Kohler engine controls