4 self-propelled operation, 5 parallel trimming for push trimmers, 6 parallel trimming for self-propelled models – Echo WT160S Owners Manual v.1 User Manual
Page 12: 7 off center tilt feature (oct)
![background image](/manuals/553499/12/background.png)
wheeled trimmer
8
OPERATION
Models: All tilt models
The OCT feature is used to trim in hard to reach places.
This feature enables both the trimmer head and body to
tilt for trimming close to the ground. The degree of tilt is
dependent on the setting selected on the height adjustment
handle located on the right side of the Wheeled Trimmer.
To engage the OCT feature, simply move the handle into
one of the four settings that are available.
Level:
1.
The height adjustment handle is set in the
position closest to the rear of the trimmer.
5.4 degrees
2.
: The height adjustment handle is set in
the second position from the rear of the trimmer.
10.3 degrees
3.
: The height adjustment handle is set in
the third position from the rear of the trimmer.
13 degrees
4.
: The height adjustment handle is set in
the position closest to the front of the machine for
maximum tilt.
The Wheeled Trimmer can be adjusted to mow at an
angle. This allows the machine to trim in hard to reach
places. Parallel trimming is adjustable on this model to
the left 2". The trimmer body pivots on the axle. To adjust
the parallel trimming setting:
Loosen the right axle nut located on the bottom of the
1.
trimmer directly behind the axle shaft (Figure 4.1).
Lift the right wheel and pull back. The wheel and axle
2.
will rotate backwards due to a slot cut in the bottom of
the trimmer frame.
Tighten the nut loosened in Step 1.
3.
When finished using the parallel trimming feature,
4.
loosen the right axle nut, and push the axle forward to
the original position.
Tighten the right axle bolt and resume regular trimming
5.
or mowing.
Models: All self-propelled models
The Wheeled Trimmer can be used in either push or self-
propelled mode.
Pull up the self-propelled bail located under the
1.
handlebar to start the self-propelled mode.
Adjust the trimmer speed with the shift lever. Position
2.
1 is the slowest and position 3 is the quickest. The
ground speed ranges from 1-2 mph.
Operate mower safely and as intended.
3.
To stop the mower release the self-propelled bail.
4.
To stop the engine, release the trimmer bail.
5.
Figure 4.1 - Adjusting the Mower
The Wheeled Trimmer can be adjusted to mow at an angle.
This allows the machine to trim in hard to reach places.
Parallel trimming is adjustable on this model 2" to the left
or the right. To adjust the parallel trimming setting:
Loosen the two nuts on the bottom of the trimmer as
1.
shown in Figure 4.2; the first (A) is located behind the
trimmer spindle, while the other (B) is located behind
the trimmer flap on the transmission support plate. Do
not adjust parallel trimming with the trimmer axle. This
will cause the drive chains to fall out of adjustment.
Pivot the trimmer body, on the slotted holes, 2" to the
2.
left or right.
Tighten the nuts loosened in Step 1.
3.
When finished using the parallel trimming feature,
4.
loosen bolts A & B and place the trimmer body in the
original position.
Tighten the bolts and resume regular trimming or
5.
mowing.
Figure 4.2 - Adjusting the Mower
C
C
A
SLOT
SLOT
B
RIGHT
AXLE NUT
SLOT
AXLE SHAFT
4.4 SELF-pRopELLEd opERaTIoN
4.5 paRaLLEL TRImmING FoR puSH
TRImmERS
4.6 paRaLLEL TRImmING FoR SELF-
pRopELLEd modELS
4.7 oFF cENTER TILT FEaTuRE (ocT)
- PAS ARTICULATING HEDGE CLIPPER ATTACHMENT PAS-2601
- 670-200
- PE-2000 Type 1/1E
- X7502026001
- SB
- 99944200610
- PAS RAPID LOADER 99944200610
- SRM-261SB
- SRM-210SB
- PAS-230
- PAS-230
- PAS-230
- PAS-260
- PAS-261
- 2410 - Type 2E
- GT-201
- POWER PRUNER PPT-2400
- HC-155
- HC-155
- Trimmer
- SRM - 265U
- HC-150
- HC-235
- HC-225
- BLADE CONVERSION KIT 231
- TC-2100
- SRM-400
- SRM - 260S
- 54
- HCA-2400
- CULTIVATOR PRO ATTACHMENT 99944200513
- RM-5000
- SRM-265T
- SHC-210
- 2110
- PE-3100 Type 1/1E
- SRM-265S
- SRM - 230U
- SRM-225I
- 99944200553
- 99944200553
- BRUSHCUTTER
- 99944200615
- PAS RAPID LOADER 99944200615
- 99944200485
- 99944200485
- SHAFT HEDGE CLIPPER HCA-265
- TRIMMER ATTACHMENT PAS-230
- TC-2100 Type 1
- HC-185
- HC-165
- SRM-210i
- SHC-260
- SRM-225SB
- SRM-211
- GT-251E
- SRM-280S
- HC-245
- HC-2410
- SRM-3800 TYPE1-E
- GT-2000
- SRM - 410U
- SRM - 410U
- GT-2000R
- GRASS/WEED TRIMMER BRUSHCUTTER and CLEARING SAW
- TC-210
- HC-1500 Type 1E
- SRM-265
- SRM230
- GT-2000EZR
- HCA-265
- SRM-260
- Power Blend TC-210
- CULTIVATOR TC-210I
- SHC-225 Serial S85312002871 - S85312999999
- GT-230
- GT-230
- SHC-265
- SRM-280T
- GT-200 R
- SRM-2305
- 99944200540
- 99944200540
- SRM - 230S
- SRM - 230S
- HC-150I
- SRM-2400SB EN
- PAS-2601 EN
- ES-2100
- CLS-5800
- PAS-225
- BRD-280 Serial S70711001001 - S70711002517
- BRD-280 Serial S70711002518 - S70711999999
- PB-760LN
- PB-755SH
- PB-265LN
- PB-255LN
- PB-250LN
- SRM-280U Serial S67511001001 - S67511006177
- SRM-280U Serial S67511006178 - S67511007612
- SRM-280U Serial S67511007613 - S67511999999
- SRM-266U
- SRM-225U Serial S79111001030 - S79111999999
- SRM-225U Serial S79111001001 - S79111001029
- SC3342
- 71110
- 70487
- 70252 v.1
- LS27
- CHF9540HXE
- CHF9540H Owners Manual v.6
- CHF9540H Owners Manual v.5
- CHF9540H Owners Manual v.4
- CHF9540H Owners Manual v.3
- CHF9540H Owners Manual v.2
- CHF9540H Owners Manual v.1
- CHF9540H Instruction v.4
- CHF9540H Instruction v.3
- CHF9540H Instruction v.2
- CHF9540H Instruction v.1
- CH9540H Owners Manual v.1
- CH9540H Instruction v.7
- CH9540H Instruction v.5
- CH9540H Instruction v.1
- CH922DH Owners Manual v.7
- CH922DH Owners Manual v.6
- CH922DH Owners Manual v.5
- CH922DH Owners Manual v.4
- CH922DH Owners Manual v.3
- CH922DH Owners Manual v.2
- CH922DH Owners Manual v.1
- CH922DH Instruction v.8
- CH922DH Instruction v.5
- CH922DH Instruction v.4
- CH922DH Instruction v.2
- CH8993H Owners Manual v.7
- CH8993H Owners Manual v.6
- CH8993H Owners Manual v.5
- CH8993H Owners Manual v.4
- CH8993H Owners Manual v.3
- CH8993H Owners Manual v.2
- CH8993H Owners Manual v.1
- CH8993H Instruction v.6
- CH8993H Instruction v.5
- CH8993H Instruction v.3
- CH8993H Instruction v.2
- CH8720iH Owners Manual v.2
- CH8720iH Owners Manual v.1
- CH8670HXE
- CH800H Owners Manual v.3
- CH800H Owners Manual v.2
- CH800H Owners Manual v.1
- CH6993H Owners Manual v.4
- CH6993H Owners Manual v.3
- CH6993H Owners Manual v.2
- CH6993H Owners Manual v.1
- CH6993H Instruction v.7
- CH6993H Instruction v.5
- CH6993H Instruction v.4
- CH6730HXE Instruction v.2
- CH6730H Instruction v.2
- CH6720H Instruction v.2
- CH6614H Owners Manual v.4
- CH6614H Owners Manual v.3
- CH6614H Owners Manual v.2
- CH6614H Owners Manual v.1
- CH611DH Owners Manual v.6
- CH611DH Owners Manual v.5
- CH5653 Owners Manual v.2
- CH5653 Owners Manual v.1
- CH5540H Owners Manual v.4
- CH5540H Owners Manual v.3
- CH5540H Owners Manual v.2
- CH5540H Owners Manual v.1
- CH5540H Instruction v.2
- CH5540 Owners Manual v.2
- CH5540 Owners Manual v.1
- CH4614 Owners Manual v.2
- CH4614 Owners Manual v.1
- CH45540 Owners Manual v.5
- CH45540 Owners Manual v.4
- CH45540 Owners Manual v.3
- CH45540 Owners Manual v.2
- CH45540 Owners Manual v.1
- CH45540 Instruction v.4
- CH45540 Instruction v.2
- CH450H Owners Manual v.2
- CH450H Owners Manual v.1
- CH4400 Owners Manual v.2
- CH4400 Owners Manual v.1
- CH4400 Instruction v.2
- CH123DH Owners Manual v.2
- CH123DH Owners Manual v.1
- CH123DH Instruction v.2
- CH123DH Instruction v.1
- 7812086 Owners Manual v.3
- 7812086 Owners Manual v.2
- 77454 Owners Manual v.5
- 77454 Owners Manual v.4
- 77454 Owners Manual v.3
- 77454 Owners Manual v.1
- 76835 Owners Manual v.1
- 76824 Owners Manual v.1
- 76635 Owners Manual v.3
- 76635 Owners Manual v.2
- 76635 Owners Manual v.1
- 76628S
- 74824 Owners Manual v.3
- 74824 Owners Manual v.2
- 74824 Owners Manual v.1
- 74800 Owners Manual v.4
- 74800 Owners Manual v.2
- 74800 Owners Manual v.1
- 74628S Owners Manual v.2
- 74628S Owners Manual v.1
- 74628 Owners Manual v.2
- 74628 Owners Manual v.1
- 74628 Instruction v.2
- 74554 Owners Manual v.3
- 74554 Owners Manual v.2
- 74554 Owners Manual v.1
- 73454 Owners Manual v.3
- 73454 Owners Manual v.2
- 72942 Owners Manual v.4
- 72942 Owners Manual v.2
- 72928S
- 72928 Owners Manual v.6
- 72928 Owners Manual v.5
- 72825 Owners Manual v.4
- DSRM-200
- PE-280 Serial S63111001001 - S63111006135
- PE-280 Serial S63111006136 - S63111999999
- PE-266S
- PE-230 Serial 03001001 - 03999999
- PE-230 Serial 05011201 - 05999999
- PE-230 Serial 05001001 - 05011200
- PE-230 Serial 06001001 - 06999999
- PE-230 Serial S68311001001 - S68311999999
- PE-225 Serial S78611002140 - S78611999999
- PE-225 Serial S78611001001 - S78611002139
- HC-152
- SHC-225 Serial S85312001001 - S85312002870
- SHC-266
- HCA-266
- 99944200563
- 99944200620
- 99944200535
- 99944200595
- 99944200513
- 99944200470
- 99944200470
- 99944200600
- 99944200465
- PAS-225VPB
- PAS-225VP
- PAS-225VP
- PAS-225SB
- PAS-280
- PAS-266
- PPT-280 Serial E08011002238 - E08011999999
- PPT-280 Serial E08011001001 - E08011002237
- PPT-266
- ES-255
- ES-250
- TC-210 Serial 05001001 - 05999999
- TC-210 Serial E13912001001 - E13912999999
- MS-53BPE
- MS-41BP
- MS-21H
- SRM-280T Serial S66711001001 - S66711008029
- SRM-280T Serial S66711008030 - S66711011609
- SRM-280T Serial S66711011610 - S66711999999
- SRM-266T
- GT-225i
- GT-225i
- DL8390 Owners Manual v.4
- DL8390 Owners Manual v.3
- DL8390 Owners Manual v.2
- DL8390 Owners Manual v.1
- DL8390 Instruction v.2
- DL8390 Instruction v.1
- DL12725 Instruction v.2
- DL12720 Owners Manual v.2
- DL12720 Owners Manual v.1
- DL12720 Instruction v.3
- 75124
- 73725
- 73724
- LS33340T Owners Manual v.5
- LS33340T Owners Manual v.4
- LS33340T Owners Manual v.3
- LS33340T Owners Manual v.2
- LS33340T Owners Manual v.1
- LS33340T Instruction v.2
- LS33340T Instruction v.1
- LS33340 Instruction v.8
- LS33340 Instruction v.7
- LS27 Owners Manual v.2
- LS27 Owners Manual v.1
- LS27 Instruction v.11
- LS27 Instruction v.8
- LS27 Instruction v.5
- LS27 Instruction v.3
- SG340 Owners Manual v.4
- SG340 Instruction v.2
- SG340 Instruction v.1
- SG340 Instruction v.3
- 73711S Owners Manual
- WT24T Owners Manual
- WT24T Instruction v.2
- WT24T Instruction v.1
- WT24 Owners Manual
- WT24 Instruction v.2
- WT190T Owners Manual v.4
- WT190T Owners Manual v.3
- WT190T Owners Manual v.2
- WT190T Instruction v.2
- WT190T Instruction v.1
- WT189 Owners Manual
- 76065 Owners Manual v.2
- 76065 Owners Manual v.1
- 74455S
- 74455 Owners Manual v.3
- 74455 Owners Manual v.2
- 74455 Owners Manual v.1
- PAS 80 Tooth Blade Brushcutter
- PAS Rapid Loader
- PAS Articulating Hedge Clipper Attachment 99944200590
- GT-225
- SRM-210
- SRM-225
- SRM-225