2N Helios IP Configuration Manual v2.7 User Manual
Page 104
Advertising
![background image](/manuals/553595/104/background.png)
104
At boot time – enable check and, if possible, update execution upon every
intercom start.
Update period – set the update period: hourly, daily, weekly and monthly.
Update at – set the update time in the HH:MM format for periodical updating at
a low-traffic time. The parameter is not applied if the update period is set to a
value shorter than 1 day.
Next update at – set the next update time.
Last update at - last update time
.
Update result - last update result. The following options are available:
Advertising