AirLive MFP-101U - Manual (Page 58)

7.8 Wireless Configuration
If you want to use the MFP Server through wireless LAN, please set up the
MFP Server through Ethernet first and make sure your wireless LAN setting is
correct. After setting the wireless LAN, unplug the Ethernet cable and restart
the MFP Server, then you can start to use the MFP Server through wireless
LAN. If the wireless configuration does not work, please plug the Ethernet
cable again, restart the MFP Server and configure the MFP Server through
Ethernet until the wireless LAN settings are correct.
The default settings of the MFP Server wireless function are as follows.
y Mode: Ad Hoc
y SSID: Default
y Channel: 11
Double Click “Wireless” icon and the wireless configuration window will
pop-up. If you use access point to build up wireless network, you have to
select “Infrastructure Mode”. If you do not have any access point and want to
use peer-to-peer connection to build up wireless network, you have to select
“Ad-Hoc Mode”.
51 AirLive WFP-101U User’s Manual