Aladdin Light Lift ALL300RM-CM(Two Circuit Fixtures Only) - Manual (Page 5)

STEP 3
Determine mounting location of directional pulleys if they are to be installed with ALL300RM.
Directional pulleys can be used to change winch cable direction, up or down, between motor pulley and
chandelier pulley. See Diagram C.
Never mount directional pulleys off plane in a remote installation. This could cause the chandelier to
fall, which could cause death, personal injury, and/or property damage.
Diagram C
STEP 4
Determine that cable position on motor pulley is correct for installation. ALL300RM is equipped with
cable running under motor pulley. See Diagram D.
Never position cable on motor pulley improperly. This could damage the cable which could cause the
chandelier to fall, which could cause death, personal injury, and/or property damage.
STEP 5
If cable rubs on motor pulley housing or motor assembly plate, change cable configuration so that cable runs
over motor pulley. See Diagram E.
Never position cable on motor pulley improperly. This could damage the cable which could cause the
chandelier to fall, which could cause death, personal injury, and/or property damage.
Diagram D
Diagram E
yes NO
Under
Over
Pulley
Quick Link
Flat Brackets
4” 7”
6”
Suitable S
tructur
e