Online manual not for resale purposes – BLITZ Toyota Celica Compressor System User Manual

Page 20

Advertising

WARNING: All images and text in this manual is the property of Blitz Co., Ltd. (Japan). No parts of this manual may be
reproduced, stored in retrieval systems, or transmitted in any way without prior written permission of Blitz Co., Ltd. (Japan).

（

11）Install the (C. 3) chamber to the inlet of

(C. 1) Compressor

(C. 3)

the compressor using the (C. c) flange
bolt M6 X 20 (6P) and the (C. 5) gasket
(1P).

※

Appling torque.

＝１０Ｎ・ｍ（１００ｋｇｆ・ｃｍ）

（

12）Installation of the fuel delivery pipe.

①

Install back the fuel delivery pipe using

the genuine bolts taken off when

disassembled.

※

Appling torque.

Ｍ６＝９．０Ｎ・ｍ（９２ｋｇｆ・ｃｍ）

Ｍ８＝１９Ｎ・ｍ（１９４ｋｇｆ・ｃｍ）

※

Make sure there are not any leaks

Genuine bolts

from the injector when starting the
engine for the first time after installing
the Super Charger.

②

Connect back the injector’s and the cam
positioning sensor’s connector.

（

13）Removal of the genuine harness cover.

Cover the harness using the (C. 48) φ
19 colgate tube

(C. 65) lock tight

(C. 48) φ 19
colgate tube
(C. 49) φ 15

(100mm) and the (C. 49)

15 colgate tube (350mm).

※

Use an electrical tape to wrap around

cogate tube

the colgate tube.

（

14）Attach the harness to the fuel delivery

pipe using (C. 65) lock tights.

Online Manual Not For Resale Purposes

Advertising