CalDigit RAIDShield - Manual (Page 7)

6
6
Installation Flowchart:
Before RAIDShield can be installed, make sure the following items are ready:
• Install the PCI card (eLane-1e, eLane-2e, eLane-1x, eLane-1ex, eLane switch or RAIDCard)
• Turn on the CalDigit product (except for RAIDCard)
• Turn on the computer.
The set up process follow these steps:
• Install the appropriate driver / GUI. (You can download the latest drivers from our support site.)
• For PC, install the RAIDShield (server or/and client) on your host machine.
• For Mac, install the RAIDShield package files on your host machine.
• Install RAIDShield on your workstations for the remote connection.
.
• Launch RAIDShield on your host or workstations
• Choose a target controller to configure.
• Configure controller settings, disk arrays preferences, email notifications, etc…
• RAIDShield can also be installed on workstations to remotely access this controller through
the same network.
Install
Drivers
Install
RAIDShield
Configure
RAIDShield
Administer
the RAID
Array