CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System User Manual
Page 106
88
Setting Tour Schedule
When the PTZ camera remains stationary for a certain time, the camera will start the defined
behaviors, such as activating the auto pan or returning the designated preset, in the defined time
frames.
1. Select
Tour Schedule on the Camera Mapping Setup dialog box (Figure 1-71), and click the
Setting button. This dialog box appears.
Figure 1-73
2. Select
Span 1, specify a period of time, and select a camera behavior to be activated during the
defined time period.
3. Set
another
span.
4. If you want to apply a different setting to weekends, select Weekend Apply and select a camera
behavior. And define whether the weekend includes Saturday or not.
5. Click
OK to apply the settings.
Note: It is required to set more than one span so that a specified camera behavior will only run in the
defined time frame. Otherwise, you can select the Auto, Preset or Multi Position Tour option (see
Figure 1-71) to configure the idle protection.