Condux Micro Duct - Manual (Page 14)

14
G. Pressurize the Micro Duct using the Micro Duct Pressure Gauge
(or similar device) to 100psi. This will help eliminate the duct from
crushing during the installation process. (Figure 31 and 32)
CAuTION: do Not Over Inflate or duct may Burst
H. Rotate Venturi for best duct lay in the tracks for the number of Micro
Duct being installed. (Figure 33)
I. Lower top Housing and arrange Micro Duct according to the track
configuration. You can now start pushing and blowing the Micro Duct.
(Figure 34)
Figure 32
Figure 33 Figure 34
Figure 31