Dascom T5040 User Guide - Manual (Page 85)

User Guide Troubleshooting
77
Press the two green release levers on both si-
des of the panel and lift the panel up. Then re-
move the jammed paper by pulling it in
direction of the arrow out of the printer.
Close the main frame by pressing the colored
section in the middle of the frame as shown by
the white arrow and ensure both left and right
hand sides of the frames are fully latched.
Close the cover. The printer is now ready to
operate and to be switched on again.
We recommend to check the
printer's operation by performing
a printout of the parameter set-
tings (see section
Printing out the
status page
, page 55).