Tally dascom 1225 – Dascom 1225 User Guide User Manual
Page 30
![background image](/manuals/557384/30/background.png)
Tally Dascom 1225
16
Online State
Function Name
Switch
Operation
LED Function
Description
Online
{S5}
L10
Toggles between Online and Offline states
Load/Eject {S4} -
Load:
Automatically loads the paper (according to path
selection) when no paper is on the platen.
Eject: For rear tractor, it retracts the form from the
platen to allow users to install cut sheets. (NOTE:
Users have to toggle the path selection lever.)
For cut sheets, it ejects the form on the platen.
LF
{S3}
-
Feeds a line with every press of S3.
FF [S3]
-
By holding S3, the printer initially feeds a few lines; then
feeds the form to the next TOF for rear tractor or ejects
the form for cut sheets.
Tear Off
{S2}
L5 flashing
This is valid for tractor mode only. It feeds the form to the
tear-off position. After tearing off the form, printing starts
on the next TOF by:
pressing S2 once, or
receiving print data from the host.