EZWatch Pro 4.0 - Manual (Page 42)

Page | 41 Software User Manual
If you want to remove an individual contact, you must single-click on their name in the lower pane
to highlight the contact, and then click on the 'Remove' button. The 'Clear' button will remove all
information currently entered into the upper pane.
3.6.10 Monitor Display Tab
Run Playback On Monitor Auto Scan
Layout
Camera List
Fig. 56. Monitor Display tab in Setting window
Run Playback on Monitor This option allows you to select the monitor on which you want the
playback program to run. It allows you to select monitor 1, 2, or 3 when available.
Cameras List The left pane will show you a list of every camera set up on your system, while
the right pane shows you which camera can be seen on the monitor. If you have a dual-monitor
display, you will see a second tab on the screen marked 'Secondary’. When active, this allows you
to specify which cameras appear on the secondary monitor.
► Note On a Business Grade system, analog and IP-based cameras can be
seen on either monitor. On a Professional Grade system, only IP-based
cameras can appear on the secondary monitor. Analog cameras can only
be seen on the Primary Monitor.
Auto Scan This allows you to configure the Auto-Scan feature of the system.
Auto-Scan is activated by using the rotating arrows icon from the Main Console window. When
active, the computer will automatically cycle through your cameras one at a time, bringing them
up in the full screen.