Great Northern Popcorn 6301 Vortex Cottaon Candy Machines - Manual (Page 8)

OPERATING PROCEDURES
Please consult the Electrical Specifications section on page 5 of this manual before operating.
:
Initial Setup
NOTE: If your machine came with a cart, skip forward to page 12 and complete the cart
assembly before completing this portion of the setup.
After unpacking your machine
1. Wipe the pan and floss head with a clean, soft cloth moistened with water.
2. If you are using the machine without a cart, make sure that you have chosen a safe
location for operation and that you place it on a stable, sturdy surface. This machine
operates at high speeds.
3. Be sure that your electrical supply matches the requirements of this machine and that a
properly grounded outlet is available.
. Avoid the use of extension cords and 3-prong adapters.
4. Thoroughly familiarize yourself with this manual, all machine components and the safety
precautions before operating. Assemble your cotton candy machine securely by checking
to be sure that the pan is locked into place using the clamping brackets (Step 5, below).
Ensure that your machine is plugged into a dedicated, grounded outlet and that you are not
wearing any loose jewelry, clothing, etc.
.
5. To attach the floss pan to the motor body assembly, first place the cleaned pan over the
floss head as shown in Figure J. Next, align the brackets on the bottom of the pan with the
bracket clamps as shown in Figure K. Finally, hook the metal rings of the clamps over the
lips of the brackets and close the clamps into place securely. Repeat for the other side of
the machine, securely fastening all four clamps and brackets.
Dry
thoroughly. IMPORTANT! Before any cleaning or maintenance, be sure that your
unit’s Power Switch is OFF and the machine is UNPLUGGED.
STABILITY IS ESSENTIAL FOR SAFETY.
NEVER TAMPER OR MODIFY THE GROUNDING
PIN OR CORD
(see page 3 for further precautions)
8
Figure J Figure K Figure L
Copyright 2012 DTX International All Rights Reserved