iCreation G-500 - Manual (Page 9)

8
Connecting
Connect the plug of the power supply to the input power
jack of the base, and then plug the power supply into a
standard AC wall outlet.
Charging
The BT handset comes with a built-
in rechargeable Li-Polymer battery.
Before initial operation, fully charge
the BT handset for 6 hours or more.
To charge the BT handset or
Galaxy, simply place it on the base.
BT Handset & Galaxy
To AC wall outlet
Notes:
Adjust the knobs on the base according to the thickness
and height of your Galaxy.
The red indicator light will be on indicating the handset's
charging properly, and it will be off when the battery is
fully charged.
When the battery is low, the handset beeps twice every
30 seconds and the red indicator flashes three times
every 30 seconds. Charge it as described above, or else
the handset will shut down when battery is very low.
13
Chapter 3: Operations
Making a Call
Make calls on the Galaxy in normal ways.
During a call, you can switch between your BT handset
and your Galaxy.
Using the Galaxy
Call Switching between the Handset and a Galaxy
During a cell line call using the , click
(the bar below is green) on the
display of the Galaxy. The call switches to the Galaxy.
To switch back, click (the bar below
is gray) on the Galaxy. The call switches back to the
.
Bluetooth
Bluetooth
Bluetooth handset
Bluetooth handset
1
2
Your handset also support voice dialing with some Galaxy.
Before using this function, set up "voice-tags" on your
Galaxy.
Press MFB twice on the handset within 0.8 seconds.
When a beep occurs, say the desired number.
Voice Dialing
Method 1: Using the Galaxy