KV2 Audio VHD2.0 - Manual

OPERATOR INSTRUCTIONS
AMPLIFICATION AND CONTROL REQUIREMENTS
This Active driven speaker must only be used in conjunction
with a KV2 Audio VHD2000 amplifier.
Please refer to the VHD2000 and VHD3200 manuals for
precise system set up and operating instructions.
KV2 Audio
Nádražní 936
Milevsko, 399 01
Czech Republic
Tel: +44 (0) 1423 816 868
www.kv2audio.com
KVV120023-00-02-0
VHD2.0
ACTIVE DRIVEN SPEAKER
System Acoustic Perfomance
Max SPL Long-term 139dB (144dB two VHD 2.0’s)
Max SPL Peak 142dB (147dB two VHD 2.0’s)
-3dB Response 100Hz ÷ 22kHz
-10dB Response 85Hz ÷ 30kHz
Full Range mode -3dB Response 60Hz ÷ 22kHz
Crossover Point 100Hz, 450Hz, 2.2kHz
High Frequency Section
Acoustic Design Horn Loaded
High Horn Coverage Horizontal / Vertical 80° x 40° / 80° x 10° (2x VHD 2.0's)
High Frequency Amplifier Requirement 200W (VHD2000 amp.)
Throat Exit Diameter / Diaphragm Size 1.4” / 3.0”
Diaphragm Material Nitride Titanium
Magnet Type Neodymium
Mid Range Section
Acoustic Design Horn Loaded
Mid Horn Coverage Horizontal / Vertical 80° x 40° / 80° x 10° (2x VHD 2.0's)
Midrange Amplifier Requirement 600W (VHD2000 amp.)
Woofer Size / Voice Coil Diameter / Design 2x 8" / 3.0" / Trans Coil
Diaphragm Material Epoxy Reinforced Cellulose
Magnet Type Neodymium
Mid-Bass Section
Acoustic Design Horn Loaded
Mid-bass Amplifier Requirement 1200W (VHD2000 amp.)
Woofer Size / Voice Coil Diameter / Design 2x 12" / 3" / Inside Outside
Diaphragm Material Epoxy Reinforced Cellulose
Magnet Type Neodymium
Speaker Input
Speaker Input EP6
Cabinet
Cabinet Material Baltic birch
Handles 6
Color "Orange peeled" Matt Black
or any RAL
Physical Dimensions
Height 933mm (36.72")
Width 700mm (27.55")
Depth 495mm (19.48")
Weight 70kg (154.0lbs)
Amplification and control
Amplification and control
VHD2000
Product Number:
KVV 987 077 - VHD2.0 R (right)
KVV 987 078 - VHD2.0 L (left)