Siemens Euroset 5020 - Manual (Page 4)

euroset 5020 / IM eng-fra-russ-kro / A30350-M209-A801-2-UP19 / 5020.fm / 24.07.2006
4
GB
Adjusting the telephone
Adjusting the ringer volume
The volume of the ringer can be set to one of 4 levels and
can also be deactivated completely (default setting: level 4).
◆ To adjust when the telephone is idle:
?5 Initiate function.
H ... I Adjust the volume with the Loud/Quiet key.
? Press the Set key.
◆ To adjust while the telephone is ringing:
Press H ... I before lifting the handset.
The last value set is saved.
Setting the ringer frequency
The frequency (speed) of the ringer can be set to one of
three levels (default setting: level 3).
?6 Initiate function.
1 ... 3 Press one of the keys 1...3:
1: highest frequency; 3: lowest frequency.
? Press the Set key.
Setting the ringtone
Ten different ringtones can be set for the ringer (default
setting: ringtone 9).
◆ To set with the telephone is idle:
?7 Initiate function.
0 ... 9 Press one of the keys 0 ... 9
? Press the Set key.
◆ To set while the telephone is ringing:
0 ... 9 Press one of the keys 0 to 9.
Setting the handset volume
The volume on the handset can be set to one of 3 levels and
saved (default setting: level 1).
?9 Initiate function.
H ... I Adjust the volume with the Loud/Quiet key.
? Press the Set key.
Mute
You can deactivate the telephone's handset and
microphone. Then the other party can no longer hear you.
J During a call: Press the Mute key
Activate: Press the key again.
Adjusting the loudspeaker
While in handsfree mode, you can set the volume to one of
7 levels and save it (default setting: 1).
H ... I Adjust the volume with the Loud/Quiet key.
Activating/deactivating the mute melody
You can activate and deactivate the mute melody for the
mute (default setting: on).
?19 #
Initiate function.
0 / 1 0: deactivate; 1: activate.
? Press the Set key.
Baby call (direct call) number setting
If a phone number is set for the Baby Call function, it is
dialled automatically when the telephone is locked
(s. "Activating/deactivating the telephone lock") after you
lift the handset (or press the Loudspeaker key) and press
any key (except ? , L , H and I ). The telephone
does not allow other phone numbers to be dialled, but
incoming calls can be received.
?82
Initiate function.
o Enter direct call number (max. 32 digits).
? Press the Set key.
When the baby call function is activated, you will see
è
and { in the display.
Deactivating
?80
Initiate function.
? Press the Set key.
Deleting a baby call phone number
?1253
Initiate function.
? Press the Set key.
Activating/deactivating the telephone lock
The telephone can be locked completely (with the exception
of a baby call phone number if set) so that it cannot dial any
phone numbers, including the baby call phone number. You
can continue to receive incoming calls.
?8 Initiate function..
0 / 1 0: unlock; 1: lock
? Press the Set key.