Longevity FORCECUT 50D - Manual (Page 19)

ForceCut 40D and 50D plasma cutters
Page 18 of 30
www.longevity-inc.com
Assembly of Consumables for the 60 Amp
Torch:
Assemble the consumables as pictured above, and described below.
1. Insert the electrode.
2. Place the copper tip on the ring, ensuring that is seated flat.
3. Secure all parts into place by turning the pink ceramic cup clockwise until it is snug. Do
not over tighten.
The torch consumables are now successfully assembled.