MK Diamond IXL 7" Dust Shroud - Manual

7" Dust Shroud
InstructIon sheet
2. Select appropriate spacer
for your model grinder chart:
1. Place grinder on the floor, face
up. (Blastrac and Bosch model grinders
1873-6, 1873-8, 1893-6, and 1894-6 do
not require a spacer. Please skip to Step 4)
Make Model Mk Part#
Metabo W23-180 165987
Milwaukee 6088-20 165986
Hitachi G18MR 165985
DeWalt* D28493 165983
Makita GA7020 165982
Jepson* 4207N 165983
3. Place spacer over grinder
head with the Exterior
Groove (a) facing down,
toward the grinder head.
Push down until Interior
O-ring (B) snaps into place.
a. Spacer Exterior Groove
B. Spacer Interior O-ring
c. Shroud Interior O-ring
5. Place shroud on grinder,
push and twist until Shroud
Interior O-ring (c) snaps into
Spacer Exterior Groove (a).
(For Bosch model grinders, Shroud
Interior O-ring (c) snaps directly
onto grinder head.)
4. Take shroud clamp and place
on the top of the shroud loosely.
7. Once shroud is tightly attached
to the grinder, attach grinding
wheel as normal. Ensure cup
wheel does not contact shroud.
6. Tighten clamp with wing
nut so it is firmly attached
to grinder head.
B
a
c