MOTA HD+ Hands free Car Kit - Manual

HD+ Bluetooth® 4.0
Hands Free Car Speakerphone
Thank You
Overview
A Answer/end button
B Status light
C Volume control
D Microphone
E On/off switch
F Personal connectivity switch
G Micro USB charging connector
H Magnet bracket
J Speaker
I
Integrated Visor Clip
What It Can Do
Your speakerphone can do all this:
Answer calls
End calls
Reject calls
Voice dialing
Announce calling number
Last number redial
Personal connectivity/speaker switch
Adjust volume
Transmit mobile music, pod casts and directions
from a GPS app
Advanced Multiuse – Stay connected to two active
Bluetooth® devices simultaneously
Specifications
Talk time up to 20 hours/Standby time up to 30 days
Charging time approximately 2 hours
Digital sound enhancement via DSP technology
Noise cancellation through DSP
Echo cancellation through DSP
A2DP (Advanced Audio Distribution Profile) for
transmitting music, pod casts and directions from a
GPS app on your phone
Status Light (ready-to-pair, call status, connection status)
Size: H98×W57×D15 mm
Weight 64 grams
Operating range up to 30 feet (10 meters)
Bluetooth® specification version 4.0
Build-in digital amplifier for enhanced audio quality
Rechargeable battery with charging option from car
charger or USB cable
Automatically Connect Your Phone
Pair the second phone:
Placing MOTA Speakerphone
in your vehicle
Additional features
Play music and GPS directions
I want to reset the pairing list in my
speakerphone
Caring for Your MOTA Speakerphone
Always store the Speakerphone with the power off and
safely protected.
Connecting Your Phone
1. Activate Bluetooth from your mobile phone
(please refer to your phone’s user’s manual)
2. Turn on your speakerphone
Press the On/off switch, MOTA speakerphone will
be ready to pair automatically with status light
flashing in red and blue color in turns as well as a
voice of “ready to pair”.
3. Use your mobile phone to search Bluetooth®
device with the name of “MOTA HD”.
4. Please connect via using the password of “0000”
(if prompted).
When successfully connected, the status light
flashes in blue color and MOTA Speakerphone will
broadcast “phone one connected”.
Make sure that your MOTA speakerphone is fully
charged for two hours before you start using it.
Use the USB cable to connect MOTA speakerphone
into your car’s power outlet. The status light will
indicate red while charging. When fully charged the
status light turns off.
Thank you for purchasing the MOTA HD+ Hands Free
Car Speakerphone.
Please review all information in this manual as it
contains important use and safety information.
B
G
A
C
E
I
D
F
H
J
On/off
Do not expose MOTA speakerphone to rain or other liquids.
Please turn off the unit during charge.
Increase the volume in the speakerphone.
Ensure that the speakerphone is paired to a device
that isplaying.
Make sure your phone is connected to the speaker
phone by tapping the answer/end button.
I am having pairing problems
Supported Bluetooth® profiles: HFP, HSP, A2DP
Pairing is only needed the first time your MOTA
speakerphone and phone are connected. When they
have been paired once they will automatically connect
when the speakerphone is on and Bluetooth® is
activated on the phone. MOTA speakerphone can
register up to 8 mobile phones. The next time you
power on, MOTA speakerphone will automatically
connect to the latest phone that was connected.
Make sure that the speakerphone and mobile phone are
connected. When you play music or GPS directions from your
mobile phone it will automatically transfer to your
speakerphone. When you have an incoming call, the music or
GPS application directions will automatically pause. When the
call is ended it will start again.
MOTA speakerphone offers Advanced Multiuse,
allowing two mobile devices to be connected at the
same time. After the first mobile phone is paired
successfully, please turn off the connected mobile
phone’s Bluetooth function and restart the speaker-
phone. Repeat steps “3” and “4” to connect the second
mobile phone. Once paired, turn on the first mobile
phone’s Bluetooth function and restart the speaker.
Both phones are now connected.
MOTA Speakerphone sits discreetly and conveniently on
the sun visor using the integrated magnet metal clip.
It can be easily taken on and off the sun visor. For
optimal sound quality place the speakerphone right in
front of you and speak directly into the speakerphone.
Troubleshooting & FAQ
I hear crackling noises
Bluetooth is a radio technology, which means it is sensitive
to objects between the speakerphone and the connected
device. It is designed for the speakerphone and the
connected device to be used within 30 feet (10 meters) of
each other, with no major objects such as walls along the
way.
Hibernating
To save power, MOTA speakerphone will hibernate
automatically after not being connected to a Bluetooth
device for more than 10 minutes.
To re-activate, simply turn on the device.
I cannot hear anything in my speakerphone
You may have deleted your speakerphone pairing
connection in your mobile phone. Follow the pairing
instructions.
Does MOTA Speakerphone work with other
Bluetooth equipment?
I cannot use Reject call, call on hold,
Redial or voice dialing
MOTA speakerphone is designed to work with Bluetooth
mobile phones. It can also work with other Bluetooth
devices that are compliant with Bluetooth version 1.1 or
higher and support a headset, hands-free and/or advance
audio distribution profile.
Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment
generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
FCC Radiation Exposure Statement The antennas used for
this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must be
co‐located for operating in conjunction with any other
antenna or transmitter.
© Copyright 2014 MOTA®. All rights reserved. MOTA® is a
registered trademark of UNorth® LLC. The Bluetooth word
mark, figure mark, combination mark, and Bluetooth Smart
and Bluetooth Smart Ready marks are all trademarks that
are owned by the Bluetooth SIG.
These features are dependent on the ability of your phone
to support a hands-free profile. Even if the hands free
profile is implemented reject call, call hold and voice dialing
are optional features which are not supported by all devices.
Please consult your device manual for details.
The speakerphone registers a list of up to 8 mobile phones.
To remove the list, you need to reset the speakerphone to
default setting by pressing together the “Volume Down” and
“Volume Up” buttons for 6 seconds.
Avoid storage at extreme temperatures (above 45°C/113°F
– including direct sunlight – or below -10°C/14°F). This
can shorten battery life and may affect its operation. High
temperatures may also degrade performance.
Personal Connectivity
Easy Voice Guidance
Easy voice guidance informs you about your
connection and low battery status.
When MOTA Speakerphone automatically re-connects
to existing mobile phones, you will hear
“phone one connected” or “phone two connected”.
When there is a incoming call, the speakerphone will
announce the incoming call number.
Low battery is announced every 3 minutes when the
speakerphone battery life is less than 20 min.
When there is an incoming call, you can transfer the
call to mobile phone via the personal connectivity
switch. If press this button again, the incoming call
will transfer to speakerphone again.
Handling Calls
Button Pressing Definitions
Instruction Duration of press
Tap
Double Tap 2 quickly repeated taps
Press Approx. 1-2 seconds
Press and hold Approx. 6 seconds
Light Status Definitions
Status Light Device Status
The status light behind the
in red and blue color
Pairing mode
The status light turns solid
blue and goes into standby
light mode
Connected
every 2 seconds
Standby/Idle
every second
Incoming call
The status light turns solid
blue
Active call
There is less than 20 min. talk
time left
The status light turns red Unit is charging
Getting Started
Function How to perform
Answer or end a call Tap the answer/end button
on your speakerphone to
answer or end a call
Make a call The call will automatically
transfer to your
speakerphone . If not tap the
answer/end button
Weight Bluetooth Speakerphone:64g
Product specifications FCC Warning Statement
Bluetooth
Specifications
Version4.0, Class2,10meters
HFP, HSP, A2DP
2.4Ghz to 2.48GHz unlicensed
ISM band
DC3.7V , 650mAH
DC5 to 6V,400mA
up to 2.5hrs. (approx)
up to 17hrs.
up to 1000hrs.
Bluetooth Speakerphone:
H98×W57×D15 mm
Bluetooth
profile supported
Operating Frequency
Band
Rechargeable Battery
AC/DC Charger
Normal Charge time
Talk time
Standby time
Dimensionm
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
Redial last number Double tap the answer/
end button when the
speakerphone is on and not
used
Mute Long press the volume down
button. A sound will indicate
that the speakerphone is
on mute every 10 seconds
until the speakerphone is
un-muted
Un-mute Long press the volume
UP button . A short sound
will indicate that your
speakerphone is un-muted
Adjust volume Tap volume + / volume- to
adjust the volume level. A
short sound will indicate
when the volume level is at its
highest or lowest limit
Function How to perform
Reject a call Double tap the answer/end
button to reject the incoming
call
For Support and Warranty, please visit
www.mota.com/support
®