MTS Criterion 40 - Manual - Manual (Page 44)

MTS Criterion ® Series 40 Product Manual 44
Specifications
Introduction
Specifications of Model C45
P ARAMETER S PECIFICATION
M ODEL C45.305 C45.605
Maximum rated force capacity 300 kN 600 kN
Force capacity options 150 kN, 200 kN, 300 kN 100 kN(Upper Zone), 500 kN,
600 kN
(33,000 lbf, 44,000 lbf, 66,000
lbf ) (22,000 lbf, 110,000 lbf,
132,000 lbf)
Frame type 2 Guide columns
Floor-standing 2 Guide columns
Floor-standing
Test zone Single Dual
Maximum test speed 750 mm/min
(29.53 in/min) 254 mm/min
(10 in/min)
Minimum test speed 0.005 mm/min (0.0002 in/min) 0.005 mm/min (0.0002 in/min)
Position resolution 0.000049 mm (0.0000019 in) 0.000016 mm (0.0000006 in)
Vertical test space
Standard length
Extended length
1540 mm (60.63 in)
1840 mm (72.44 in)
2000 mm (78.74 in)
Crosshead travel
Standard length
Extended length
1100 mm (43.31 in)
1400 mm (55.12 in)
1750 mm (68.90 in)
Space between columns 650 mm (25.59 in) 750 mm (29.52 in)
Frame height
Standard length
Extended length
2535 mm (99.80 in)
2835 mm (111.61 in)
3490 mm (137.40 in)
Frame width 1362 mm (53.62 in) 1660 mm (65.35 in)
Frame depth 1100 mm (43.31 in) 1272 mm (50.08 in)
Weight
Standard length with enclosure
Standard length without
enclosure
Extended length with enclosure
Extended length without
enclosure
1660 kg (3660 lb)
1605 kg (3538 lb)
1760 kg (3880 lb)
1695 kg (3737 lb)
3530 kg (7782 lb)
3500 kg (7716 lb)
Power requirements 380-480 V AC
20 Amp
50/60 Hz
5200 W
3 Phase 380-480 V AC
20 Amp
50/60 Hz
5200 W
3 Phase
Criterion_product manual.book Page 44 Monday, July 28, 2014 3:52 PM