Multiquip MTR35W - Manual (Page 9)

MTR-35W— PARTS & OPERATION MANUAL — REV. #8 (06/26/01) — PAGE 9
Definition of Tamping Rammer
The Mikasa MTR-35W Tamping Rammer is a powerful
compacting tool capable of applying a tremendous force in
consecutive impacts to a soil surface. Its applications include
soil compacting for backfilling for gas pipelines, water pipelines
and cable installation work.
The impact force of the MTR-35W levels and uniformly compacts
voids between soil particles to increase dry density.
Circular motion is converted to create impact force. The MTR-
35W tamping rammer develops a powerful compacting force at
the foot of the rammer. To maintain optimum performance, proper
operation and service are essential.
Construction of Tamping Rammer
The Mikasa MTR-35W is equipped with an Robin air cooled,
oil-injected two cycle gasoline engine. Transmission of the power
takes place by increasing the engine speed to engage the
centrifugal clutch.
Rammer Gearbox and Spring Cylinder
The Mikasa MTR-35W uses an oil bath lubrication system.
Always check the oil level through the oil level sight glass at the
rear of the tamper foot.
Controls
Before starting the MTR-35W Tamping Rammer identify and
understand the function of the controls, see Figure 1 on page 11.
GENERAL INFORMATION