Retsch RS 200 - Manual (Page 26)

15.11.2006

Retsch GmbH
26
Doc. Nr. D 98.725.9998
General
Cleaning
Do not clean the RS200 with running water.
Danger to life through current surge.
Use only a cloth moistened with water. Solvents are not
permitted.
Maintenance
To ensure that your RS200 will function reliably, the following
maintenance work should be done from time to time, but at the
latest every month :
 Check that roller 1 in the locking bolt moves easily. If it
doesn’t, oil it, e.g. with sewing machine oil.
(Fig. 17 Locking bolt)
 Clean magnets 2 in the locking bolt.
 To ensure that the grinding jar can be clamped and
released safely, it is essential that the clamping
mechanism can move easily. It must be checked and
cleaned every day and lubricated when necessary.
(Fig. 17.1 Locking bolt)
To ensure that the housing cover on the RS 200 can close
reliably, it is essential that roller 1 in the locking bolt can move
easily.
Maintenance of the rubber springs
Caution! Due to capacitor discharging at the frequency converter
the device conducts voltage for up to 3 minutes after the mains
plug has been disconnected.
Fig. 17 Locking bolt
Fig. 17.1 Clamping mechanism
Clamping
mechanism