Sightron SIIBL 20-60X85 HD-A - Manual

TM
TM
TM
TM
TM
TM
TM TM
TM
TM
TM
TM
TM TM
Binocular
Instruction
Manual
Spotting Scope
Instruction
Manual
Congratulations on the purchase of your new Sightron Spotting Scope. We
have designed your spotting scope for a lifetime of enjoyment and
performance. Sightron Spotting Scopes are the finest products on the market
and are backed by Sightron’s Lifetime Warranty. If you have any questions
please feel free to contact us at [email protected] on the web, or by phone
at 919-562-3000.
Your Sightron Spotting Scope
Before using your Spotting Scope we suggest you take a minute to check
each accessory and learn it’s function. Your Scope includes the following:
· Variable Zoom Eyepiece
· Protective Scope Case
· Ocular and Objective Lens Caps
Removing and Installing Eyepieces
Your Spotting Scope comes with a Variable Zoom eyepiece from the factory.
To install the eyepiece simply rotate the eyepiece mounting ring in a
clockwise direction until tight. To unistall the eyepiece simply rotate the
eyepiece in a counter clockwise direction.
Note: Only hand tighten the mounting ring as only a snug fit is required.
Ocular Lens
Sunshade
Focus Knob
Changing Magnification
The Zoom Eyepiece is best used when you need to view a distant object
closer. As you zoom up in magnification the field of view will become
smaller and the object will become larger. To change magnification on the
eyepiece rotate clockwise or counter clockwise to the desired magnification.
Note: The eyepiece will not rotate any lower or higher than the specified
magnification.
Focusing Your Spotting Scope
To focus your Spotting Scope, simply rotate the focus knob until the image
becomes clear. On models that have coarse and fine focusing adjustments, use
the coarse adjustment for longer focal adjustments and the fine adjustment
for shorter focal adjustments. Under certain conditions the more magnification
you use, the image can become unclear due to atmospheric conditions.
Mounting Your Spotting Scope
All Sightron Spotting Scopes use the industry standard 1/4 x 20 thread screw
hole. To mount your Spotting Scope simply screw the mounting plate using
the mounting screw into the bottom of the spotting scope mount plate
until snug.
Note: Do not over tighten.
Maintenance
Keeping your lenses clean is important and dirt or improper cleaning can
degrade the image or destroy the coating. A lens cleaning kit is recommended
and can be purchased at most retail outlets. Do not use water or window
cleaning products to clean lenses as the minerals will remove the lens
coatings.
Sightron, Inc. Lifetime Warranty
Sightron, Inc., will repair this product or replace the product at Sightron’s
discretion. This warranty only covers failure due to defects in materials
or workmanship which occur during normal or regular use. It does not cover
damage which occurs in shipment or failures which result from accident,
misuse, abuse, neglect, mishandeling, misapplication, alteration, modification
or service by anyone other than Sightron, Inc., or damage that is attributable
to acts of God.