Traditions Vortek StrikerFire - Manual (Page 8)

8
BEFORE HANDLING ANY FIREARM, UNDERSTAND ITS
OPERATION.
Not all firearms are the same and some have features
and mechanical operation unique to that specific firearm. Before using
a firearm you should learn the mechanical features of that specific
firearm you intend to
use. If you feel unsure about any operational
aspects of this firearm, please contact Traditions™ before proceeding
with its operation.
NEVER ALLOW THIS FIREARM TO BE USED BY ANYONE WHO
DOES NOT UNDERSTAND ITS SAFE OPERATION OR HAS NOT
READ THIS MANUAL IN ITS ENTIRETY.
ALWAYS USE THE CORRECT COMBINATION OF
MUZZLELOADING APPROVED LOAD COMPONENTS FOR YOUR
PARTICULAR MUZZLELOADING FIREARM
as detailed in this
manual.
MAKE CERTAIN THE BARREL IS CLEAR OF ANY
OBSTRUCTIONS BEFORE SHOOTING.
Dirt, water, snow or other
objects may inadvertently become lodged in the bore of the barrel. A
small obstruction can cause a dangerous increase in pressure and
may damage your firearm and cause injury to yourself and others.
Refer to the field cleaning section of this manual if you discover any
obstructions in the barrel for instructions on how to remove it.
MAKE SURE THAT ALL ACCESSORIES, SUCH AS HOLSTERS,
GRIPS, SLINGS, SCOPES AND ANY OTHER ACCESSORIES ARE
COMPATIBLE
with the firearm and that they do not interfere with the
safe operation of the firearm. It is your responsibility to understand and
follow all of the instructions in this manual, as well as those which may
be supplied with your ammunition and loading components and any
accessory and how they all relate to each other.
NEVER DISASSEMBLE YOUR FIREARM beyond the instructions
outlined in this manual. Improper disassembly or re-assembly of your
firearm may create a dangerous situation which can lead to serious
injury or death to you or others or also the destruction of property.
NEVER MANIPULATE, ADJUST OR ALTER ANY OF THE
INTERNAL COMPONENTS OF YOUR FIREARM.
Improper
manipulation or alteration of any internal component may affect the
safety and reliability of your firearm and create a situation where
serious injury or death could occur. In addition do not add or replace
any of the parts in your rifle unless they are genuine Traditions™ parts
and you properly follow the instructions provided by Traditions™. The
use of non-Traditions™ parts will void all warranties. Any alteration or
replacement of parts in your Traditions™ firearm unless performed by
a qualified gunsmith using genuine Traditions™ parts. If you do
otherwise, improper functioning of your firearm may occur and serious
injury or death and damage to property may result.